My 2003 KIA Sorento stopped starting, we took it to a mechanic and had it fixed. The starter keeps breaking off and falling into the flywheel. We have changed the starter and flywheel several times, how do I solve this?
Auto Repair Questions and Answers – Auto Repair Help – Ask A Question – Freeautomechanic.com
5 Apr, 2012 1 Comment
My 2003 KIA Sorento stopped starting, we took it to a mechanic and had it fixed. The starter keeps breaking off and falling into the flywheel. We have changed the starter and flywheel several times, how do I solve this?
29 Mar, 2012 1 Comment
I have 97 Hyundai Elantra that was starting the one day just stopped the next.I think the battery is good, starter is good what else could it be? When you turn the key over it does nothing not even a sound but the wiper radio and everything else works.
8 Mar, 2012 2 Comments
Greetings:
I have a 1987 grand marquis with a 302 engine- 467,000 miles. Engine seal replaced twice- once at 105k and again at 295k. Rebuilt trans at 387,000 miles due to 4th gear being junk.
I have been having a couple of issues with starting and constant running. First let me describe my issue with starting:
When the car doesn’t start when you attempt it: It just sits there spinning. Like there is no ignition/no catch. But the starter is engaging. So far it has been completely random in terms of timing and weather. It seems the only way to get it to start is to play with it. This can range from hitting the gas to turning the car in the run position and moving the shift lever back and fourth. Also attempting to start the car in “N” sometimes works.
Now when the car just shuts off or dies:
This has happened to me a couple of times now… You will be driving maybe holding a constant speed or maybe a slow acceleration. And the car will just die. Nothing- boom dead. No noise, no shaking, no hum, no back lace, just dead. When you try to START the car it doesn’t start. Starter engages but there is no ignition or catch.
Things we have changed and replaced since the start of this issue:
-oil (for the heck of it)
-oil filter-spark plugs
-spark plug wires
-battery leads- including cleaning the battery leads and cleaning the starting solidend
-distributor cap
-Component on the side of the Distributor (not sure of the name of it) – it controls the timings?
-Also changed the “COIL” pack part – (that connects the the middle spark plug wire in the middle of the distributor)
-Checked for bare or broken wires leading to or away from the distributor- repaired if damaged
-Checked Fuses
** NOTE: When ever the car was not able to start. We did check to see if the fuel pump was turning on or was active. The fuel pump as far as we can tell is perfectly fine. Except it does have over 400k miles… But yea…
At this point we have no idea what is causing this. If any one has any ideas that would be great. I don’t really want to get rid of this car for possibly a dumb problem. Father bought the car in 87 before my parents got married. I was even taken to and from the hospital with it, and run across the back seat when i was younger. So this car has a lot of memory’s. So far the local Ford dealer doesn’t even want to look at this car and local repair shops have no idea what it could be. They just want to throw parts at it and get it out the door. But that doesn’t help me when I’m an hr away from home and this happens. She’s been good to my family and I want to be nice back to her. ^_^
Thank you for your help in advance!
Kyle!
9 Feb, 2012 1 Comment
My 96 Toyota Corolla passed smog and then the following week had the timing belt, power steering belt, oil change, throttle cleaned, vehicle speed sensor replaced, and now has a code for misfire on 1,3, and 4. I was told to have a tune up done but did not yet have the money so I was on my way home and it stalled and wont start now. It sounds like it wants to start but doesn’t, I had it towed to my home and now it is sitting there. It has gas and at the time it stalled the battery had charge but now 3 days later the battery is dead.
18 Jan, 2012 1 Comment
Camshaft pos sens p0340 Hyundai 2.7 changed cam sensor crank sensor now it wont start
23 Dec, 2011 2 Comments
I backed up my driveway one day and the truck just died. That day when I tried to start it it would crank. The next day it stopped cranking over and now just makes a buzzing noise when I try to turn it over. My ford wont start. I have replaced fuel pump, clutch saftey switch, ignition switch, starter relay, and the fuel pump selector switch. Still wont start. Please Help!
22 Dec, 2011 1 Comment
Y ford explorer won’t start what can I do to try to figure out what’s wrong can u help me please.
22 Dec, 2011 1 Comment
I have a 96 Jeep Cherokee sport. Straight six. It will not start. It will turn over and that’s it. We have replaced plugs, rotor, distributor cap. Fuel pump and filter. and the crank shaft sensor. When I look in the oil fill hole, it looks like the rocker arms are moving. I don’t think it is the timing belt. Help
19 Dec, 2011 1 Comment
i have a 98 blazer i was driving it last night and the oil cooler line blew and the check guages light came on oil pressure dropped to zero and the truck lost power and shut off.. i rolled it into a parking lot and got the line fixed and filled back up with oil and now the truck will not start… i changed the battery out thinking it was that then changed the starter relay out as well the truck just makes one solid click noise
5 Dec, 2011 1 Comment
van went bang while driving and lost all power it wont start but has power
Since 2006 Copyright Freeautomechanic.com