I am replacing the ignition switch on 1978 Dodge B300. I have disassembled down to the parking lock plate covering the switch. Is a puller required or is there some other method to reach the switch?
1978 dodge b300 ignition switch
I am replacing the ignition switch on 1978 Dodge B300. I have disassembled down to the parking lock plate covering the switch. Is a puller required or is there some other method to reach the switch?
The ignition switch is located under the column, I belive you are working on the key lock cylinder.
There is a special tool that presses the parking lock plate down so you can remove the c-ring in order to remove the plate and the spring below it.
http://www.shopwiki.com/_KD+Tools+3509+Steering+Wheel+Lock+Plate+Remover/Installer?o=1086277417&s=3885
Comments are closed.