97 chevy s10 4wheel drive Manuel transmission

Clutch is slipping can I adjust it

Keywords: adjustclutchs10
Rob

View Comments

  • The Clutch on this vehicle is Hydraulic and is self adjusting. There is no adjustments that can be made.

    If the clutch is slipping then it is time to replace the clutch disc and pressure plate assembly.

    If you find it difficult to get the transmission into gear, the most common reason is a failed Clutch Master and or Slave cylinder assembly. I recommend replacing both at the same time and when possible, get the complete assembly from a dealership as they come pre-bled.

Recent My Questions

1991 Dodge Dakota 5.2 surges at low rpm

My vehicle surges at low rpm. There are no vacuum or fuel leaks and a new IAC made no difference.…

5 days ago

How to Replace Thermostat 3.6L Chevy/GMC – Code P0128

Thermostat Housing for 2017-2022 Chevrolet Colorado or GMC Canyon with the 3.6L engine. This repair took care of the check…

5 months ago

Jeep Wrangler TJ 97-2006 Clutch Replacement

Removal & Installation Remove transmission. If original clutch cover will be reinstalled, mark position of cover on flywheel for assembly…

5 months ago

Fuel Pump Driver Module (FPDM) 2014 Ford Explorer 3.5L

Engine has no codes. Scan tool shows cam and crank correlation are good. Fuel pressure from pump is at 60…

6 months ago

Just put these sick headlights on my Jeep Wrangler

Headlamp Bulb R&R Warning: halogen bulb contains gas under pressure. bulb may shatter if glass envelope is scratched or if…

7 months ago

Hole in valve cover 2017 Hyundai Santa Fe

Intake CVVT came apart and blew a hole in the valve cover. How much would something like that cause to…

9 months ago