RESPONSE
This was an approved quality repair up until a few years ago. Now New York State department of motor vehicle does not recognize that has a quality repair. And compression fittings are now a failure on New York State inspections. So even though it was acceptable a few years ago now is not. If you’d like a copy of this from the department of motor vehicle you can go to https://dmv.ny.gov/
The brass AGS brake line compression fittings state right on the package that they are “Not for brake lines”.
Dorman offers a High pressure compression union fitting constructed of high-quality materials for long-lasting durability. However, Not recommended for hydraulic brake systems.
I have used brake line compression fittings many times over the past 20+ years. And have found the brake line itself tends to rust through in other areas before any issues from the use of the compression fitting as a repair.
When driving the gauges gyrate and the dash lights flicker. Under acceleration the headlights dim. After some driving distance, the…
Fog Light Replacement Unplug electrical connector from fog light assembly Remove 13mm retaining nut and washers from fog light under…
If you haven't heard already, GMThe agency said that without the warning light, a vehicle may be driven with low…
https://youtu.be/Svf620OlWF0 This video is the rear section of the frame kit installation. https://youtu.be/Z7uBahE6hoY This video is of the center section…
Hi, just following up on 02 Caravan: I was scanning with the newest up date and not the vin# so…
