Front brakes on my Ranger engaged yesterday and will not release. They are not locked. I was able to limp home. Sounds like master cylinder needs to be replaced. Can anyone advise?
Keywords:Brakes
Front brakes on my Ranger engaged yesterday and will not release. They are not locked. I was able to limp home. Sounds like master cylinder needs to be replaced. Can anyone advise?
http://www.freeautomechanic.com/brakes.html
If the will not release then the caliper is sticking or the caliper hose is collapsed. Drive the vehicle around the block to get the brakes hot. Jack up the front end and try to spin the wheels by hand to see which side is sticking.
check to see if calipiers are sliding free and realeaseing
Comments are closed.