my 95 intrepid is in limp mode. I have checked a few things and found there is no power coming off a light green wire at the trans controle module. That is the 12volt supply wire i checked this on a wiring diagram. Could this be a computer problem. I am able to apply voltage to this wire using a jumper from the battery and i can here the relay clicking on but still no shifting.
95 intrepid limp mode
Keywords:Computer Problem
Are there any trouble codes present?
Here is how to check them if you have not done so: http://www.freeautomechanic.com/diagnostictroblecodes8.html
Sometimes a bad or failing VSS can cause this issue btu would check codes first. http://www.freeautomechanic.com/vss-vehicle-speed-sensor.html
Comments are closed.